Bristle Blaster Set Cordless – Battery and Charger

(1 customer review)

1,000.00

REINFORCEKiT® 4D (R4D) is a wet lay-up system, wrapped helicoidally around the pipe in order to bring the mechanical resistance to the damaged pipe section.

Availability: In stock

SKU: BB-SB-603-BMC Category:
Total Sold: 31

REINFORCEKiT® 4D (R4D) is a wet lay-up system, wrapped helicoidally around the pipe in order to bring the mechanical resistance to the damaged pipe section. The number of layers, determined by calculation, is linked not only to the pipe pressure, temperature, diameter and thickness but also to the pit depth and length, the steel grade and the pipe location. The repair design and material requirements are provided by 3X software REA after information compilation according to ASME B31G, CSA Z662, ISO 24.817 and ASME PCC-2 codes and standards.

REINFORCEKiT® 4D is recommended to repair and reinforce pipelines operating at temperature between -50°C (-58°F) up to +150°C (+302°F) subject to external/internal corrosion, leaks (dedicated procedure for live repair), dents and mechanical damages. The system restores the pipe integrity and prevents from further deterioration. This composite sleeve is made of 400 g/m² Kevlar® tape and highly-reinforced ceramic epoxy resin. 

USES

  • Reinforce pipe suffering from:
    • internal and external corrosion
    • pinhole, leakage, crack
    • mechanical damage, dent
    • severe abrasion, erosion
    • sabotage ...
  • Restore pipe integrity

APPLICATIONS

  • Onshore and offshore (on air)
  • All pipe geometries including welds, elbows and tees
  • All pipe sizes (no limitation)
  • High pressure pipeline
  • Pipe operating from -50°C up to +150°C
  • Pipe transporting most common fluid and gas

BENEFITS

  • Online repair (no shutdown required except in case of leakage)
  • No loss of production
  • Non-conductive repair
  • No hot work
  • Long-term performance
Weight 2 kg
Use

PIPE REPAIR & REINFORCEMENT

Pipe diameter

No limitation

Pipe temperature

50°C / +150°C (-58°F / +302°F)

Fiber

Kevlar®

Resin

R3X55, R3X95, R3X110, R3X130, R3X70+, R3X150+
The most suitable resin will be selected according to the defect, the application and the temperature

1 review for Bristle Blaster Set Cordless – Battery and Charger

  1. Amandine Romano-Pierard

    Test good

Only logged in customers who have purchased this product may leave a review.