ROLLERKiT®

PROTECTIVE COMPOSITE SOLUTION FOR CORROSION UNDER PIPE SUPPORT (CUS)

Product Sheet

ROLLERKiT® is a preventive and curative repair system for corrosion under support (CUS), for new and old installations.

It can be installed on pipe, on support or on composite wrapping depending on the level of corrosion.

ROLLERKiT® is made of high polymer pads thermo-welded on glass fiber fabric and specific epoxy resin. Pads are designed to support the weight of the pipe according to ASME B31.1. Glass fiber fabric ensures the pads assembly, and applied with the resin on a corroded structure, it will stop the corrosion.

ROLLERKiT® on pipe

ROLLERKiT® on support

USES

  • Avoid contact between trapped water and pipe support
  • Avoid galvanic corrosion
  • Avoid catastrophic failures caused by crevice corrosion
  • Eliminate and prevent from further corrosion at pipe support
  • Protect from impacts

APPLICATIONS

  • Onshore and Offshore
  • Old and new installations
  • Any pipe support designs
  • Pipe diameters from 4″ to 56″
  • Pipe temperature from -30°C to +150°C (-22°F to +302°F)

BENEFITS

  • Long-term service lifetime
  • Non-metallic solution
  • Pipe integrity preserved
  • Installation on pipe or on support
  • Dual use: preventive & curative system

ROLLERKiT® Range

ModelPipe O.D. (inch)ApplicationTemperaturesResinLength/Width/Thickness (mm)
ROL-284″ to 28″Onshore & Offshore topside-30°C/+150°C (-22°F/+302°F)F3X8Roll of 3000 x 160 x 8
ROL-5630″ to 56″Onshore & Offshore topside-30°C/+150°C (-22°F/+302°F)F3X8Roll of 3000 x 300 x 12

ROLLERKiT® Components

A single kit allows up to 28 repairs according to pipe diameter

Roll of 86 pads
Resin cartridges
Kit of accessories including: spatula, squeegee, mixing plate, bubble level systems and belts

Have a look to this case study and discover how ROLLERKiT® protected several pipe supports against corrosion under support (CUS):

rOLLERKiT® ON PIPE

ROLLERKiT® ON SUPPORT

IMPLEMENTATION BY TRAINED AND CERTIFIED APPLICATORS ONLY