What are the components of R4D product?
REINFORCEKiT® 4D is a wet lay-up system made of Kevlar® tape and specific bi-component epoxy resin.
What are the components of R4D product? Read More »
REINFORCEKiT® 4D is a wet lay-up system made of Kevlar® tape and specific bi-component epoxy resin.
What are the components of R4D product? Read More »
TANKiT® REINFORCEKiT® PATCH Service temperature -50°C / +70°C (-58°F / +158°F) -50°C / +150°C (-58°F / +302°F) Max. tank diameter Up to 20m No limitation Max. defect size Up to 100mm No limitation Max. pressure Depends on tank & defect diameter No limitation Sustainability Temporary Long-term (up to 20 years for external defect)
What are the main technical differences between TANKiT® and REINFORCEKiT® PATCH? Read More »
REINFORCEKiT® PATCH is designed according to international standards ISO 24.817 & ASME PCC-2 & API 653.
To what standards do REINFORCEKiT® PATCH comply with? Read More »
REINFORCEKiT® PATCH is applicable on all tank designs and sizes (no limitation). It is compatible with most common fluids and gas.
What kind of tank can this product repair? Read More »
PREVENTIVE & CURATIVE SYSTEM ROLLERKiT® is not only a preventive system against corrosion that protects pipe support against corrosion. It will also repair the pipe support thanks to the combination of the 3 components (pad, fiberglass and epoxy resin). The application of the epoxy resin will stop the corrosion development and will prevent from further corrosion.
What are the main advantages of ROLLERKiT® compared to other systems? Read More »
ROLLERKiT® is made of techno polymer PPS pads thermo-welded on glass fiber fabric and epoxy resin. Pads are designed to support the weight of the pipe (according to ASME B31.1) and glass fiber fabric ensures the pads assembly. All these components are applied with the resin on a corroded surface, and that will stop the corrosion.
What are the ROLLERKiT® components? How does ROLLERKiT® work? Read More »
ROLLERKiT® has a long-term service lifetime (estimated at 20 years). It may vary depending on conditions.
How long will ROLLERKiT® last? Read More »
A crack/crevice between pipe and support traps water. Water cannot evacuate and creates corrosion that quickly causes wall loss.
Why corrosion is developed on pipe supports? Read More »
A single ROLLERKiT® (made of 86 pads) allows up to 28 repairs according to pipe diameter. A minimum of 3 pads is necessary to be installed on the support. To determine the number of pads needed by pipe diameter, please refer to the table in the product TDS.
How many repairs can we perform with one ROLLERKiT®? Read More »
Yes, a surface preparation is needed to ensure the adhesion of the ROLLERKiT®. The surface must present a Sa2½ and a minimum roughness of 60μm.
Is surface preparation necessary? Read More »