What kind of tank can this product repair?
TANKiT® can be used on various tank and pressure vessel designs. It is compatible with most common liquid fluids and gas.
What kind of tank can this product repair? Read More »
TANKiT® can be used on various tank and pressure vessel designs. It is compatible with most common liquid fluids and gas.
What kind of tank can this product repair? Read More »
TANKiT® can be used for temperatures ranging from -50°C to +70°C (-58°F to +158°F). It can repair a defect up to 100mm size.
What is the performance range of TANKiT®? Read More »
TANKiT® is compliant with no standard but has been deeply tested and approved by 3X R&D Department.
To what standards do TANKiT® comply with? Read More »
TANKiT® is a pre-engineered product sold in ready-to-use kit. The kit includes steel plate with filler, 5 Kevlar® patches (300x300mm) with resin and set of accessories (including cover plate and set of 4 magnets) ==> 1 TANKiT® = 1 REPAIR.
What are the components of TANKiT®? Read More »
TANKiT® is a pre-engineered product sold in ready-to-use kit. The kit includes steel plate with filler, 5 Kevlar® patches (300x300mm) with resin and set of accessories (including cover plate and set of 4 magnets) ==> 1 TANKiT® = 1 REPAIR.
What are the components of TANKiT®? Read More »
ONLINE REPAIR No shutdown required for REINFORCEKiT® PATCH repair (except if leakage). LARGE RANGE OF APPLICATION REINFORCEKiT® PATCH repairs internal and external corrosion, weld defects, leaks, dents and mechanical damages with no defect size limitation. REINFORCEKiT® PATCH repairs all tank and pressure vessel diameters with no pressure restriction. REINFORCEKiT® PATCH repairs all tank and pressure
What are the main features & advantages of REINFORCEKiT® PATCH in few points? Read More »
REINFORCEKiT® PATCH is a long-term product. For an external defect the repair is designed for a lifetime of 20 years.
How long will the repair last with REINFORCEKiT® PATCH? Read More »
Yes, REINFORCEKiT® PATCH technology can be applied without shutdown except in case of through-wall defect.
Can REINFORCEKiT® PATCH be applied online? Read More »
Yes, a good surface preparation is essential to get optimal resin bonding and guarantee the sustainability of the repair. The prepared surface should match with Sa 2½ or St3 standards and roughness reaches at least 60 microns (Rz). It can be done using grit blasting or Bristle Blasting (MONTI technology distributed in France by 3X).
Is surface preparation necessary? If yes, what standard should be followed? Read More »
REINFORCEKiT® PATCH can be used for unlimited pressure and temperatures ranging from -50°C to +150°C (-58°F to +302°F). There is no limitation in defect size.
What is the performance range of REINFORCEKiT® PATCH? Read More »