REINFORCEKiT® PATCH is a composite patch repair system tailored made for each repair. It is made of Kevlar® patches and 3X bi-component epoxy resin. The dimensions & number of patch and the quantity and type of resin will depend on the defect and will be calculated using 3X REA software (in accordance with existing international […]
What are the components of REINFORCEKiT® PATCH? Read More »
ONLINE LEAK SEALING STOPKiT® VESSEL is an emergency stop leak solution for tank and pressure vessel applicable without shutdown or de-pressurization. LARGE RANGE OF PERFORMANCE STOPKiT® VESSEL can be applicated on pressure vessel operating up to 80°C (176°F). STOPKiT® VESSEL can be applicated on pressure vessel diameters from 58’’ to 138’’. STOPKiT® VESSEL can be
What are the main advantages of STOPKiT® VESSEL? Read More »
STOPKiT® VESSEL is a temporary repair system and must not be used more than few weeks. It is difficult to exactly evaluate how long it will be efficient as it depends on several parameters (pressure vessel size, hole diameter, pressure …). For long-term solution, refer to our REINFORCEKiT® PATCH product.
How long will the repair last with STOPKiT® VESSEL? Read More »
STOPKiT® VESSEL is sold in a rigid case including the following components: belt, rubber patch, tightening system (ratchet strap and screws), torque wrench, STOPKiT® VESSEL Positioner (specific device developed to center the patch on the leak), white marker, magnet system (only necessary for vertical installation) and additional 5 patches (reusable product).
What are the STOPKiT® VESSEL components? Read More »
Yes, STOPKiT® VESSEL can be applied under pressure. No shutdown or depressurization is required.
Can STOPKiT® VESSEL be applied online? Read More »
No, surface preparation is not required. The pressure vessel only needs to be cleaned with acetone and the external surface must be free of sharp edge.
Is surface preparation necessary? Read More »
STOPKiT® VESSEL can be installed on tanks, pressure vessels, columns (horizontal or vertical designs) up to 3.5m diameters (138”), and is recommended to stop various type of leaks (oil, gas, water and many other aggressive fluids). STOPKiT® VESSEL range includes 4 references depending on pressure vessel size (from 1.5m to 2.5m and from 2.5m to
What kind of installation can STOPKiT® VESSEL be used on? Read More »
STOPKiT® packaging is made of rubber patch, belt(s) (number of belts depends on pipe diameter), stainless steel bars, bolts & screws and STOPKiT® Positioner (specific device developed to center the patch on the leak and prevent slipping during tightening).
What are the STOPKiT® components? Read More »
ONLINE REPAIR No shutdown required for R1D repair. TIME & COST-EFFECTIVE SOLUTION REINFORCEKiT® 1D is a prepreg system. It does not require any mixing nor measuring è TIME SAVING. REINFORCEKiT® 1D applied as protective coating: no calculation, no surface preparation and only 2 layers needed è COST EFFECTIVE. USER-FRIENDLY PRODUCT Factory saturated fiber. No heating
What are the main features & advantages of R1D in few words? Read More »
The number of layers depends on several parameters (defect type, pipe diameter, wall thickness, design pressure, temperature, environment …). 3X ENGINEERING has developed its own software called REINFORCEKiT ENGINEERING ANALYSIS (R.E.A) to design the composite repair and define the number of layers and material requirements in accordance with existing international standards. This is ONLY applicable
How many layers of R1D must be installed? Read More »
